UAV reliability test
UAV reliability test
1. UAV high and low temperature test
Since the environmental conditions of unmanned aerial vehicle operation are often changeable and complex, and the control ability of each machine for internal power consumption and heat generation is different, which ultimately leads to the different adaptability of the hardware of the aircraft to temperature, in order to meet the operation requirements under more or specific conditions, flight test under high and low temperature conditions is necessary.
2. UAV drop test
Drop test is a routine test that most products need to do at present. On the one hand, it is to test whether the packaging of UAV products can protect the product itself well to ensure transportation safety; On the other hand, it is actually the hardware reliability of the aircraft.
3. UAV GPS satellite search test
For a UAV, the GPS module is a very basic hardware requirement, and belongs to one of the important sensor units of the aircraft control system. It can not only provide data information such as position coordinates and flight speed, but also help to realize many intelligent functions such as precise hover, route planning and automatic return.
4. UAV vibration test
There are many sensors inside the UAV, such as IMU inertial measurement unit. If the sensed data is affected by vibration, the final result is that the UAV may be "Crazy" and completely out of control; Secondly, the internal hardware structure is complex, and the integration strength of the fuselage is high. If the vibration causes abnormal hardware connection, looseness of screws or modules, etc., it is actually intolerable. At the same time, the vibration of the aircraft itself will affect the stability of flight and the effect of aerial photography.
5. UAV key test
The remote controller of the UAV has a control rocker and many function buttons, and the fuselage also has frequency keys, battery buttons, etc. these keys will be aged and worn with long-term frequent use. The key test is actually to test whether these keys can continue to work normally under the maximum use intensity and how strong the anti-aging ability is. After all, if the keys are broken, flight control and function use will be affected, and the customer experience is poor.
6. UAV line bending test
With the development of UAV integration, many connections have been reduced as much as possible by the design of the shopping malls. However, it is inevitable that there are connections between some modules, and these lines will be subject to long-term bending. Therefore, it is very important to conduct necessary bending tests to detect the reliability of the links between modules.
Shenzhen Xunke standard is specialized in providing reliability testing, automotive electronic testing, material testing, failure analysis, electronic product testing, packaging testing, export certification, etc. to provide customers and industries with more comprehensive, higher quality and more convenient testing and consulting services